AP10 Rapid Solvent Extractor
The AP10 Rapid Solvent Extractor is a semi-automated design. It is equipped with a 1-150 ml multi-volume sample extraction cell. It is designed primarily for laboratories with a relatively small amount of sample processing. The system is economical and provides the user with a single Fast and efficient extraction of samples.
Heating temperature: room temperature ~ 200 °C;
Pressure range: atmospheric pressure ~ 18MPa (2700psi);
extraction cell volume: 1mL, 5mL, 10mL, 22mL, 34mL, 66mL, 100mL, 150mL;
furnace: 270 degrees arc heating, ± 1 °C temperature;
extraction time: 8min ~ 20min;
extract filtered automatically, self-cleaning;
built-in temperature, pressure control and alarm unit, safe and reliable operation;
pressure control unit: equilibrium pressure control, ± 0.3MPa start control pressure;
compliance GB /T 19649-2006 standard method.
The advantage of
rapid solvent extraction technology has been developed in recent years in a high temperature (up to 200 °C), high pressure (up to 20MPa) rapid extraction of solid or semi-solid sample pretreatment methods, and commonly used Soxhlet extraction Compared with ultrasonic extraction, microwave extraction and other methods, the extraction time can be greatly shortened, the extraction efficiency can be improved, the amount of extraction solvent can be reduced, the extraction cost of a single sample can be significantly reduced, and the advantages of being solvent-saving, rapid, healthy and environment-friendly, and high degree of automation can be achieved.
AP10 series adopts sequential extraction sample processing mode, the system automatically completes on-line cleaning, online filtration, and on-line purification and other operations, high efficiency, easy to use, convenient and fast;
extraction of fast
AP10 processing each sample average time of 8 ~ 20min, Compared with the traditional extraction technology, it saves a lot of time, and while the AP10 extracts the sample, the experimenter can also perform other work;
environmental protection and health
AP10 significantly reduces the amount of solvent used for the extraction. The solvent consumption of each sample is only a few milliliters to several tens of milliliters, and the entire extraction process of APLE is automated and completely closed, effectively reducing the volatilization of organic solvents and worker exposure. Organic solvent time, green and environmental protection, health and safety;
convenient and flexible conditions for
sample extraction parameters include: extraction pressure, extraction temperature, extraction time, flush volume, extraction times, sample cleaning, etc., users can be flexibly set, extraction conditions Easy and flexible optimization;
high degree of
automation The fully automated AP10 sample extraction process can be completely unattended. The entire sample extraction process: solvent loading, heating, pressurization, extraction, collection, filtration, purification, and cleaning are all automatically performed in one step.